The Sterilisations area enables users at your practice to document sterilisations in Zavy. This article explains the steps needed to document Sterilisation Cycle.

1. Click on "Sterilisations".

2. Click on "Create Cycle"

3. Complete the relevant "Cycle Information" fields, including Steriliser (e.g., Sirona DAC), Type (e.g., Vacuum Leak Rate Test), Cycle No (generated by the Steriliser), Serial Number of the Instrument and Start Time of the Cycle. (Note: *Asterisked items are required fields.)

4. Click Save Changes to open the Load Cycle window.

5. You can View Cycle, Edit, Lock Cycle and Archive Cycle on the "Action Tab"

6. You Update Status on the "Status" Tab. click on Load Cycle then load the equipment. Once loaded click on Start Cycle it will start the cyle.

7. Once Cycle is completed you can go to the "Status" Tab. Click on Complete Cycle then Click on Unload Cycle.

8. Once you have Unloaded and Inspected the equipment. You can update the "Inspection" Tab.